Solenoid Controlled Valve DSHG-04 Series Pilot Operated Directional Valves
Features
These are groundbreaking high-pressure, high-flow solenoid directional valves—every part (including the solenoid) uses a unique design. Equipped with wet solenoids, they offer low noise, long service life, and zero external oil leakage.
Stable Operation
Strong magnetic and spring forces make the valves resistant to contamination, ensuring reliable performance.
Solenoids
Solenoid Connectors (DIN Type)
The connectors meet international standard ISO 4400 (Fluid power systems: Three-pin electrical plug connectors—specifications).
AC Solenoids
50/60 Hz universal solenoids need no rewiring when frequency changes.
DC Solenoids (Trusted K-Series)
These have surge absorbers, with three key benefits:
Surge voltage stays very low, so no interference (like noise) for devices such as computers.
No contact sparks, extending relay service life.
Minimal time lag for spool reset after solenoid de-energization.
Specifications
| Valve Type | Model Numbers | Max. Flow★1
L/min (U.S.GPM) | Max. Operating Pressure
MPa (PSI) | Max. Pilot Pressure
MPa (PSI) | Min★2 Required Pilot Pres.
MPa (PSI) | Max. T-Line Back Pressure
MPa (PSI) | Max. Change over Frequency
min -1(Cycles/Min) | Approx. Mass
(Kg) |
| Ext. Drain | Int. Drain | AC | DC | R |
Standard Type
Shock-less Type | DSHG-03-3C∗-∗-13 | 160 (42.3) | 25 (3630) | 25 (3630) | 0.7 (100) | 16 (2320) | 16 (2320) | 120 | 120 | 120 | 6.9 |
| DSHG-03-2N∗-∗-13 | 6.9 |
| DSHG-03-2B∗-∗-13 | 6.4 |
| (S-)DSHG-04-3C∗-∗-51 | 300 (79.3) | 31.5 (4570) | 25 (3630) | 0.8 (120) | 21 (3050) | 16 (2320) | 120 | 120 | 120 | 8.5 |
| (S-)DSHG-04-2N∗-∗-51 | 8.5 |
| (S-)DSHG-04-2B∗-∗-51 | 8 |
| (S-)DSHG-06-3C∗-∗-52 | 500 (132) | 31.5 (4570) | 25 (3630) | ★ 3
0.8 (120) | 21 (3050) | 16 (2320) | 120 | 120 | 120 | 12.4 |
| (S-)DSHG-06-2N∗-∗-52 | 12.4 |
| (S-)DSHG-06-2B∗-∗-52 | 11.9 |
| (S-)DSHG-06-3H∗-∗-52 | 21 (3050) | 1.0 (150) | 110 | 100 | 110 | 13.2 |
| (S-)DSHG-10-3C∗-∗-42 | 1100 (291) | 31.5 (4570) | 25 (3630) | ★3 1.0 (150) | 21 (3050) | 16 (2320) | 100 | 120 | 100 | 45 |
| (S-)DSHG-10-2N∗-∗-42 | 100 | 100 | 100 | 45 |
| (S-)DSHG-10-2B∗-∗-42 | 21 (3050) | 60 | 60 | 50 | 44.5 |
| (S-)DSHG-10-3H∗-∗-42 | 52.9 |
Solenoid Ratings
| Valve Type | Electric source | Coil Type | Frequency
(Hz) | Voltage (V) | Current & Power at Rated Voltage |
| Source Rating | Serviceable Range | Inrush (A)★ | Holding (A) | Power (W) |
Standard Type
Shock-less Type | AC | A100 | 50 | 100 | 80 - 110 | 2.42 | 0.51 | ― |
| 60 | 100 | 90 - 120 | 2.14 | 0.37 |
| 110 | 2.35 | 0.44 |
| A120 | 50 | 120 | 96 - 132 | 2.02 | 0.42 |
| 60 | 108 - 144 | 1.78 | 0.31 |
| A200 | 50 | 200 | 160 - 220 | 1.21 | 0.25 |
| 60 | 200 | 180 - 240 | 1.07 | 0.19 |
| 220 | 1.18 | 0.22 |
| A240 | 50 | 240 | 192 - 264 | 1.01 | 0.21 |
| 60 | 216 - 288 | 0.89 | 0.15 |
DC
(K Series) | D12 | ― | 12 | 10.8 - 13.2 | ― | 2.45 | 29 |
| D24 | 24 | 21.6 - 26.4 | 1.23 |
| D48 | 48 | 43.2 - 52.8 | 0.61 |
| AC→DC Rectified (R) | R100 | 50/60 | 100 | 90 - 110 | ― | 0.33 | 29 |
| R200 | 200 | 180 - 220 | 0.16 |
Model Number Designation
| F- | S- | DSHG | -06 | -2 | B | 2 | A | -C2 |
| Special Seals | Type | Series Number | Valve Size | No. of Valve Position | Spool-Spring Arrangement | Spool Type | Special Two Position Valve | Models with Pilot Choke Valve |
F:
For Phosphate Ester Type Fluids
(Omit if not Required) | None:
Standard Type | DSGH:
Solenoid Controlled Pilot Operated Directional Valve, Sub-plate Mounting | 3 | 3 | C: Spring Centered | 2, 3, 4 , 40, 5, 60, 7, 9, 10 , 11, 12 | ― | C1:
With C1 Choke
C2:
With C2 Choke
C1C2:
With C1 &C2 Choke
(Omit if not Required) |
| 2 | N: No-Spring | 2 , 3 , 4 , 40 , 7 |
| B: Spring Offset |
None
Standard Type
S:
Shock-less Type | 4 | 3 | C: Spring Centered | 2, 4, 40, 60, 10, 12
(3, 5, 6 7, 9, 11)★1 | ― |
| 2 | N: No-Spring | 2, 4, 40 (3, 7)★1 | A★2 |
| B: Spring Offset | 2, 4, 40 (3, 7)★1 | A★2, B★2 |
| 6 | 3 | C: Spring Centered | 2, 4, 40, 60, 10, 12
(3, 5, 6 7, 9, 11)★1 | ― |
| H: Pressure Centered |
| 10 | 2 | N: No-Spring | 2, 4, 40 (3, 7)★1 | A★2 |
| B: Spring Offset | 2, 4, 40 (3, 7)★1 | A★2, B★2 |
| -E | T | -R2★3 | 0 | -C | -H | -N | -51 | -L |
| Pilot Connection | Drain Connection | Spool Control Modification
(Omit if not required) | Coil Type | Manual Override of Pilot Valve | Bult-in Orifice for Pilot Line | Type of Electrical Conduit Connection | Design Number | Models with Reverse Mtg. of Solenoid |
None:
Internal Pilot
E:
External Pilot | None:
External Drain
T:
Internal Drain | R2: With Stroke Adjustment, Both Ends
RA: With Stroke Adjustment, Port "A" End
RB: With Stroke Adjustment, Port "B" End | AC
A100, A120
A200, A240
DC
D12, D24, D48
AC→DC
R100, R200 | None: Manual Override Pin
C:
Push Button & Lock Nut | ― | None:
Terminal Box Type
N:
Plug-in Connector Type
N1: ★4
Plug-in Connector with Indicator Light | 13 | ― |
| L: (Omit if not required) |
AC
A100, A120
A200, A240
DC
D12, D24, D48
AC→DC
R100, R200 | ― | 51 | ― |
| L: (Omit if not required) |
R2 : With Stroke Adj., Both Ends
RA: With Stroke Adj., Port "A" End
RB: With Stroke Adj., Port "B" End
P2 : With Pilot Piston, Both Ends
PA : With Pilot Piston, Port "A" End
PB : With Pilot Piston, Port "B" End |
| 52 | ― |
H:★5
Refer to |
| ― | 42 |
| L: (Omit if not required) |
Product Tags:
|
|
DSHG-04 Series High Flow Solenoid Controlled Valve Solenoids Pilot Operated Directional Valve Images
|
